MercRacing Products Products

Heat exchanger Remote Fill Type1

Wed, 08 Sep 2010 04:24:54 -0700

Custom built for our small engine bay compartments. Allows a nearly stealth look. Unit is out of the way of maintenance /repair components when working on your car. Automatically allows air to leave the heat exchanger as you fill. Fully sealed for leak and evaporation free system. Unit bolts on to your frame or if you have the oem mounting brace pictured you can mount this way.

Heat Exchanger Powder Coating Service

Wed, 08 Sep 2010 04:24:54 -0700

Jackson Racing Aftercooler Kit RSX CIVIC with Rule Pump

Wed, 08 Sep 2010 04:24:54 -0700

MercRacing Original Aftercooler Core, Hose Kit with clamps, Fittings for Radiator, MercRacing Heat exchanger and remote fill, Rule Pump. Bell Cooling Core Available at additional charge. Click on picture to see the Bell Core You need to provide your own wiring for pump. It is recommended you install a temperature sensor on the provided area to keep track of air temps. Product made per order. This is a custom built product. Current ETA will be provided upon order request. Powder coating service available Click Here

Caster Plates - Acura RSX (DC5) & Honda Civic SI (EP3)

Wed, 08 Sep 2010 04:24:54 -0700

Add 1.65" (42mm) of caster. Adjustable Camber - Add .173 to 1.06" (4mm to 27mm) Professionally machined Solid and proven performance. Increases camber as the wheel is turned Reduces the need of adding too much static negative camber that can decrease your acceleration and braking performance.

Air to Water Heat Exchanger - Honda / Acura

Wed, 08 Sep 2010 04:24:54 -0700

Air to water heat exchanger for aftercooler systems. Extremely Efficient dual row cooling. Core is 2.25" thick. Dual pass configuration for even better cooling. Oversized endtanks for increased water capacity and increased temperature stability. Phenomenal finish that can be polished to mirror finish. Direct bolt on to RSX or Civic SI. Works with any aftercooler system. Also available without mounting brackets for mounting on your personal project vehicle. -12AN fittings option available upon request at separate charge.

RSX Strut weld-on caps for Koni shock inserts

Wed, 08 Sep 2010 04:24:54 -0700

Weld on threaded caps for installing Koni 8611-1257 and 8610 Race shocks. Allows for easy installation and maintenance of the shocks.

Jackson Racing Aftercooler Kit RSX CIVIC with Type 101 Heat Exchanger

Wed, 08 Sep 2010 04:24:54 -0700

Bell Aftercooler Core, Hose Kit with clamps, Type 101 Heat exchanger, Fittings for heat exchanger, Rule Pump. Requires remote fill tank. You need to provide your own wiring for pump. It is recommended you install a temperature sensor on the provided area to keep track of air temps. Product made per order. This is a custom built product. Current ETA will be provided upon order request.

Jackson Racing Aftercooler Mini Radiator type Core RSX CIVIC

Wed, 08 Sep 2010 04:24:54 -0700

Same performance as the

Jackson Racing Aftercooler Kit RSX CIVIC with Bosh Pump

Wed, 08 Sep 2010 04:24:54 -0700

Bell Aftercooler Core, Hose Kit with clamps, Fittings for Radiator, Type 100 heat exchanger, BOSH Pump. You need to provide your own wiring for pump. It is recommended you install a temperature sensor on the provided area to keep track of air temps. Product made per order. This is a custom built product. Current ETA will be provided upon order request.

Water to Air Intercooler Pump and Harness, Bosch Cobra

Wed, 08 Sep 2010 04:24:54 -0700

This water/air intercooler pump is designed for circulating water in water/air intercoolers. Unlike other bilge pump-based solutions available, this pump is designed by Bosch and Ford specifically for water/air applications. This pump is Bosch part number 0 392 022 002 and is used in many of the supercharged Mustang Cobras and supercharged Mercedes. This is an OEM pump. It ships with no documentation. Please check below for pump specifications from Bosch; these are the most detailed specifications available: This information is directly from Bosch. Unit conversion shows that this pump flows 317 GPH; any seller who advertises differently is incorrect. VERY IMPORTANT! We ship these pumps with a wiring harness adaptor that will give you positive and negative wires to connect the pump electrically. Most sellers of this pump just ship it with the socket and you have to find your own adaptor. The adaptor can cost up to $20 plus shipping by itself! The Bosch Cobra Water to Air Intercooler Pump is designed for a 16 gauge wire, which this part has. Most connectors you will find being sold for this pump are fuel injector connectors with 18 or 20 gauge wire which may result in poor pump performance, voltage drop, or dangerously hot wires.

Water to Air Intercooler Radiator Pump, Rule 401FC

Wed, 08 Sep 2010 04:24:54 -0700

These Rule 401FC pumps are designed for livewell/baitwell/bilge applications but their high flow rate and low cost makes them ideal for use as water to air intercooler pumps.

Must be mounted at the low point in the system - these pumps push water but they will not pull it.
Must be mounted after the water in your system is cooled (after radiator or icebox) - excessive heat may result in premature pump failure.
Pump operates on 12V-14V DC.
Flow rate: 500 GPH.
Designed for use with room temperature water, however we have tested these pumps long term with 130° antifreeze/coolant with excellent results.
Designed with a minimum 1500-hour service life in mind, these pumps come with a 3 year warranty direct from Rule/ITT. However, use with high temperature water and/or antifreeze/coolant may void this warranty.

Pump is brand new and will be shipped in retail packaging. Rated at 1500 hours (90,000 miles at 60 MPH, if you average only 20 MPH, that's still 30,000 miles!)

Jackson Racing Aftercooler Kit RSX CIVIC with Rule Pump

Wed, 08 Sep 2010 04:24:54 -0700

Bell Aftercooler Core, Hose Kit with clamps, Fittings for Radiator, Type 100 Heat exchange, Rule Pump. You need to provide your own wiring for pump. It is recommended you install a temperature sensor on the provided area to keep track of air temps. Product made per order. This is a custom built product. Current ETA will be provided upon order request.

Jackson Racing Aftercooler Bell Core RSX CIVIC

Wed, 08 Sep 2010 04:24:54 -0700

Cooling Core. This unit reduces air temps from your supercharger. Full throttle temps are lowered greatly. Temperatures seen are dependent on supercharger PSI configuration and ambient temperatures. Power achieved with this aftercooler was 335HP and 219TQ with a Jackon Racing header, and stock 2005 RSX Type S muffler.

Hondata 4bar Map Sensor

Wed, 08 Sep 2010 04:24:54 -0700

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H, F and K-series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors.

GM Open Element IAT Sensor with Pigtail

Wed, 08 Sep 2010 04:24:54 -0700

GM Open Element IAT Sensor with Pigtail Recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and include a 6" wire pig-tail with weatherproof connector. Threads are 3/8" NPT

CT Auto Tensioner Bracket

Wed, 08 Sep 2010 04:24:54 -0700

This product relocates the power steering to allow the use of the original Honda/Acura auto tensioner. This improves belt tension at any rpm as the belt stretches at higher rpm levels. PSI boost levels are increased and become steady and easier to tune. Belt schredding is a thing of the past. You will no longer need to adjust any tensioners manually. Installs easily with just two additional OEM powersteering bolts and new belt.

Aftercooler hose kit - 12ft

Wed, 08 Sep 2010 04:24:54 -0700

Aftercooelr 5/8" Hose Kit includes, radiator fittings, necessary clamps.

Water to Air Intercooler Radiator - 24x12x1 (Type 100)

Wed, 08 Sep 2010 04:24:54 -0700

Water to Air Intercooler Radiator - 24x12x1 (Type 100) [WAT001002]

These radiators are designed specifically for use in air to water intercooler applications.

Only one inch thick, they cool water as close to ambient temperature as possible and are easy to mount in tight locations.
With eight strategically placed mounting points, they are easily mountable with the water inlet and outlet on either the left or the right.
All aluminum construction provides maximum cooling with water or antifreeze/coolant.
Water inlet and outlet are 1/2" NPT female threads, just like most air to water intercoolers.
These radiators feature a fill/pressure cap on top and a drain plug on the bottom for incredible installation flexibility.
In case you wish to include a water temperature gauge in your installation, these radiators feature a 1/8-27 NPT tap for a temperature sending unit. They ship with a plug installed in case you do not wish to use this feature.

Radiator is packaged well with bubble wrap before shipping. Depending on your air to water intercooler setup, these can be used for 600-1200 HP. Could also be used as a radiator for small-engine or some drag racing applications.

Power Steering Hose bracket

Wed, 08 Sep 2010 04:24:54 -0700

Modifies power steering hose adapter to add clearance for hood. Only necessary on RSX vehicles.

Jackson Racing Auto Tensioner Bracket

Wed, 08 Sep 2010 04:24:54 -0700

Jackson Racing Auto Tensioner Bracket. Replaces Jackson Racing manual tensioner and allows the use of the OEM Auto tensioner. Eliminates constant need to adjust tensioner, belt slip, shredded belts and broken pulley parts. Over 80 Satisfied customers! Bolts are included with the bracket. Instructions here