MercRacing Products

This unit is pre-ported to 74mm to allow the use of larger OEM or aftermarket throttle bodies.

Benefits:

• Ability to upgrade throttle body without having to use additional spacers, just order our simple adapter that matches your TB.
• Increased Flow, horsepower and smoother air flow due to its larger and direct path from throttle body to supercharger.
• Can easily be polished or anodized (additional costs apply)

We are now taking pre-orders for the new and only custom highflow JRSC inlet.  Full production units are expected in about 6 to 8 weeks. First come first serve basis.

This unit is pre-ported to allow the use of larger OEM or aftermarket throttle bodies with our adapter plates.

Benefits:

• Ability to upgrade throttle body without having to use spacers, just order our simple adapter that matches your TB.
• Increased and smoother air flow due to its larger and direct path from throttle body to supercharger
• No porting necessary
• Hidden vacuum lines for a clean look
• Can easily be polished or anodized (additional costs apply)

From T1 Race Development:

Finally, a fast response air temp sensor with a good connector and small body!

This sensor uses an open element for quick response and has the same calibration as the GM/Delco sensor so it’s compatible with any system that has a calibration for the GM sensor (pretty much everything aftermarket does).

It’s 1/8″ NPT male threads, so mounting is easier than ever.

The connector is a 2 pin Deutsch DTM connector.

This kit consists of (1) air temp sensor and (1) DTM connector kit.  Please specify if you prefer the connector kit as a crimp on kit (requires a DMC Mil Spec crimper) or a pigtail that you can splice in.