Audi A6 C7 Divorce Reservoir
$289.00
DIY Reservoir – you may need to modify the provided bracket or make your own mounting bracket.Â
-
Stainless Steel reservoir/fill tank for setting up your air to water cooling system for best performance and eliminate air in the system automatically.
A beautifully polished unit that will outlast the life of your car. The use of this product allows you to run your personalized coolant mix for your setup.  You can run distilled water with some water wetter or a small amount of coolant for pump lubrication.  Water has better heat capacity and transfer than coolant. The unit allows for full-time air bleeding of the system as the air passes through the heat exchanger it is pushed out into the reservoir. this keeps your water in pristine air-free condition for the best cooling.  Air bubbles in the system will reduce performance dramatically.
The unit comes with a bracket that mounts to your car frame for ease of installation.
Click here for > INSTALLATION INFORMATION
| Weight | 3 lbs |
|---|---|
| Dimensions | 10 × 5 × 4 in |
You must be logged in to post a review.
Related products
-
Quick View
Air to water high capacity heat exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5
$489.99Add to cartNew batch changes for Sept 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick ViewSale!
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
$195.00Add to cart- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick ViewSale!
Pierburg CWA150 Pump – with Audi harness
$425.00Add to cartNOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. -
Quick View
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95Read moreThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
-
Quick View
Audi 3.0T Thermostat Housing
$234.99Introducing the Audi 3.0T Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC-machined, aluminum anodized thermostat.
Inspired by shopdap.com’s list of Common Issues with 3.0T (Supercharged) TFSI Audi Engines.Supplier: German Performance Solutions
Add to cart -
Quick View
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
$665.99Add to cartLooking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Hardware Kit! Included is all the hardware needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! NOTE: Tuning software not included.
-
Quick View
Air to water high capacity heat exchanger for Audi S4 S6 S7 S8 A7 A6 A8 (Raw Aluminum)
$589.99Add to cartOur largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4 B8 and B8.5 and various other Audi vehicles.
This is for the Raw Natural aluminum finish (not polished)
Hoses for setup that have the connections on the driver side are included for free.Â
-
Quick View
(S4/B8, A6/C7) Audi heat exchanger convenience install pack
$72.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 4 Feet of 3/4″ High-quality hose (not cheap rubber hose/ will not collapse or kink easily) One 180 silicone hose 7 …
(S4/B8, A6/C7) Audi heat exchanger convenience install packRead More
-
Quick View
Audi Slim Heat Exchanger – Multiple Applications S4 S5 S6 A4 A6 SQ5 and many more
$299.95Add to cart7/6/2023 These are in stock and ready to ship. A budget-friendly unit for those looking to replace or upgrade the OEM HX and doing Stage 1 upgrades.
Compatible with most Audi cars, A6, A7 , S4, SQ5, etc. Good option for cars with front camera that cannot use our full size units.
-
Quick ViewSale!
Full Audi 3.0T Supercharged PCV Relocation Assistance Kit
$339.95Add to cart**CREC & C6 A6 ENGINE COMPATIBILITY UNKNOWN**
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
Reviews
There are no reviews yet.