Save time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system.
- 4 Feet of 3/4″ High-quality hose (not cheap rubber hose/ will not collapse or kink easily)
- One 180 silicone hose
- 7 All stainless steel clamps (these will not rust)
- 3 straight 3/4″ hose connectors
**The heat exchanger already has brackets and mounting bolts.
| Weight | 8 lbs |
|---|---|
| Dimensions | 8.5 × 5.4 × 1.7 in |
You must be logged in to post a review.
You may also like…
-
Quick View
Air to water high capacity heat exchanger for Audi S4, S5, A6, A7, SQ5
$424.95Add to cartNew upgraded and updated design starting in August 2020! The Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help from Audi owners/friends, we now provide you a cooling solution that performs …
Air to water high capacity heat exchanger for Audi S4, S5, A6, A7, SQ5Read More
-
Quick View
Air to water high capacity heat exchanger for Audi S4 Aluminum Finish
$424.95Add to cartThese are currently EXPECTED TO BE IN STOCK IN AROUND MID-END NOVEMBER. New upgraded and updated design starting in August 2020! The Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help …
Air to water high capacity heat exchanger for Audi S4 Aluminum FinishRead More
Related products
-
Quick ViewSale!
034MOTORSPORT FRONT STRUT BRACE, B8 AUDI A4/S4, ALLROAD, BILLET ALUMINUM
$415.00$395.99Add to cart034Motorsport is proud to offer our Billet Aluminum Front Strut Brace for the B8 Audi A4/S4 & Allroad! These Audi models do not come with a strut brace from the factory, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. While the B8 chassis comes from the factory with a support bar located behind the fire wall, this component is not significantly structural to the chassis and allows strut tower deflection. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end due to undesired suspension geometry changes.
The 034Motorsport Strut Brace incorporates an extremely rigid billet aluminum center section that attaches to both strut towers and to the firewall in two locations, improving the vehicle’s steering feel and handling performance. This robust chassis reinforcement is machined from 6061-T6 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The end result is a significantly more rigid front end that provides precise, consistent feedback through the steering wheel and ensures that you enjoy a more connected driving experience.
This strut brace was thoroughly tested by 034Motorsport on in-house B8 and B8.5 Audi S4 Development Vehicles before release.
FEATURES:
- Truss Design is Lightweight and Extremely Rigid
- 6061-T6 Billet Aluminum Construction with Clear Anodized Finish
- Attaches to Both Strut Towers and the Firewall in Two Locations
- Engineered to Enhance Handling Dynamics and Performance
- Improves Steering Feel, Consistency, and Precision
WHAT’S INCLUDED:
- 034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement
- Strut Tower Brackets
- Strut Bar Brackets
- Transfer Punch
- Transfer Punch Guides (4)
- Mounting Hardware
-
Quick ViewSale!
Peirburg CWA100-3 Coolant Pump – with Audi harness
$340.95$335.95Add to cartThis pump upgrade is a favorite among performance shops and performance users worldwide. The pump offers a robust and innovative design. Driven by a brushless motor, integrated speed controller what can be controlled via remote module(PWM). The pump is extremely reliable while providing great flow and cooling performance. The pump offers very quiet operation, even …
-
Quick View
034MOTORSPORT 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$45.00Add to cartReplace those failure prone, plastic 3.0 TFSI supercharger bleeder screws with the 034Motorsport 3.0 TFSI Supercharger Bleader Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple use and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These …
Reviews
There are no reviews yet.