MercRacing 3/4″ (19mm) Silicone Cap for bypass heater, vacuum, water, coolant
$14.99
Reinforced Silicone Caps
-
- Universal Silicone Caps. Used for blocking off coolant pipes, vacuum, etc.
- Fully reinforced and able to handle high pressure from engine cooling system.
- Able to handle vacuum pressure.
- Unlike rubber caps, these will not dry out, rot and leak overtime
- Able to handle high engine bay temperatures
| Weight | 1 lbs |
|---|---|
| Dimensions | 2 × 2 × 2 in |
You must be logged in to post a review.
Related products
- Quick View
Audi 4.0T V2 Intercooler/Charge Cooler Core
$874.95Add to cartNEW!: For 2023 the core has been revamped to add additional density, additional channels, and improved performance. We have also added a bleed port to aid in purging the air out of the system during the initial fill-up. THE FIRST BATCH WITH THESE IMPROVEMENTS IS EXPECTED AROUND THE END OF MARCH 2023
A true high-performance replacement core for 4.0T Audi Vehicles. Increases reliability over the OEM core.
- Quick View
Pierburg CWA150 Pump – with Audi harness
$369.95Pre-order nowOUT OF STOCK AND PRE ORDERS ONLY – Factory ETA has not been met. DO NOT HAVE A DATE AT THIS TIME
NOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. - Quick View
(S4/B8, A6/C7) Audi heat exchanger convenience install pack
$72.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 4 Feet of 3/4″ High-quality hose (not cheap rubber hose/ will not collapse or kink easily) One 180 silicone hose 7 …
(S4/B8, A6/C7) Audi heat exchanger convenience install packRead More
- Quick View
Air to water high capacity heat exchanger – Aluminum Finish
$489.99Read moreThe Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help from Audi owners/friends, we now provide you a cooling solution that performs amazingly on your Stock, upgraded or higher boost tuned …
Air to water high capacity heat exchanger – Aluminum FinishRead More
- Quick ViewSale!
034Motorsport SüperDüper Charger 84mm Throttle Body System, B8/B8.5 Audi S4/S5 3.0TFSI
$598.00Add to cartInstallation Effort: MILD
Supercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SüperDüper Charger 84mm Throttle Body System. The purpose of this kit is to improve power beyond the factory throttle body found on the supercharged 3.0 TFSI engine in the B8/8.5 S4/S5s, in a clean and cost-effective package.
- Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cart - Quick View
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5
$36.00Add to cartThe 034Motorsport Street Density B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & B9 Audi A4/S4/Q5/SQ5 Transmission Mount Upgrade is designed to improve the performance of the factory transmission mount assembly with a high durometer rubber mount replacement. This part is a direct, drop-in upgrade for the factory rubber damping medium used at the rear of the transmission …
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5Read More
- Quick ViewSale!
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$345.00Add to cartBACKORDERED: Orders placed today will hold your spot in line for the next available units, Mid August 2022 ETA
One of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
- Quick View
Audi divorce kit DIY components
$46.95Add to cartThese parts are specifically made for the MercRacing heat exchangers. Fitting for the heat exchanger bleed port 5 feet silicone hose for the heat exchanger to reservoir bleed port setup Flow control valve Billet T fitting for reservoir fill tank. Reinforced silicone cap for coolant system divorce operation. Click here for > INSTALLATION INFORMATION
- Quick View
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95Add to cartThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
- Quick View
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$28.95Add to cartReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
- Quick View
Air to Water Aftercooler for MercRacing Manifold
$749.99Add to cartVersion 2 – Redesigned custom higher density core. Large aftercooler core for our proprietary Air to water manifold and supercharger kits. 9″ wide and 3.5″ of cooling depth offers superior airflow and cooling than any traditional aftercooler core available today. That is over 40% additional cooling depth as a bolt-on application!
- Quick View
Audi 3.0T PCV Relocation Parts Kit
$199.95Add to cartNOT COMPATIBLE WITH CREC ENGINES
PCV Relocation Assistance KIT. Additional components for the 3.0T conversion to external oil/vapor catch can setup.
Check out the project here. AudiC7 Owners is driving the progress of this change and configuration. Please watch his videos for complete information on this project and what is needed.
https://www.youtube.com/watch?v=so_Rj8ZIzz8&t=88s - Quick View
(4.0T) Audi heat exchanger convenience install pack
$38.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 16″ of 3/4″ High-quality EPDM hose (not cheap rubber hose) 6 All stainless steel clamps (these will not rust) 2 straight …
(4.0T) Audi heat exchanger convenience install packRead More
- Quick View
Audi B8/B8.5 3.0T Supercharged Headers
$3,395.00 – $3,440.00Select optionsRedStar Exhaust long tube headers is the ultimate mod for your Audi 3.0 TFSI supercharged engine. Dyno tested and proved design to gain 30HP easily with no other modifications. You can get even more, 500+hp with the proper tune and other mods! Replaces the Stock manifold and Catted/Test pipe section.
Reviews
There are no reviews yet.