MercRacing 3.0TFSI SUPERCHARGER SINGLE BLEEDER SCREW REPLACEMENT B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$14.99 – $18.00
-
Replace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC machined billet 304 stainless steel bleeder screws are tough enough to outlast the life of your vehicle.
NOTE: Do not over-torque the bleeder screws. The maximum torque is 3NM. Over torquing can lead to the bleeder bung breaking off.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
| Add Replacement Seals | YES, NO |
You must be logged in to post a review.
Related products
-
Quick View
Air to water high capacity heat exchanger for Audi S4 S6 S7 S8 A7 A6 A8 (Raw Aluminum)
$589.99Add to cartOur largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4 B8 and B8.5 and various other Audi vehicles.
This is for the Raw Natural aluminum finish (not polished)
Hoses for setup that have the connections on the driver side are included for free.Â
-
Quick View
Audi 3.0T Thermostat Housing
$234.99Introducing the Audi 3.0T Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC-machined, aluminum anodized thermostat.
Inspired by shopdap.com’s list of Common Issues with 3.0T (Supercharged) TFSI Audi Engines.Supplier: German Performance Solutions
Add to cart -
Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cart -
Quick View
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5
$36.00Add to cartThe 034Motorsport Street Density B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & B9 Audi A4/S4/Q5/SQ5 Transmission Mount Upgrade is designed to improve the performance of the factory transmission mount assembly with a high durometer rubber mount replacement. This part is a direct, drop-in upgrade for the factory rubber damping medium used at the rear of the transmission …
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5Read More
-
Quick View
Audi B8/B8.5 3.0T Supercharged Headers
$3,395.00 – $3,440.00Select optionsRedStar Exhaust long tube headers is the ultimate mod for your Audi 3.0 TFSI supercharged engine. Dyno tested and proved design to gain 30HP easily with no other modifications. You can get even more, 500+hp with the proper tune and other mods! Replaces the Stock manifold and Catted/Test pipe section.
-
Quick View
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
$665.99Add to cartLooking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Hardware Kit! Included is all the hardware needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! NOTE: Tuning software not included.
-
Quick View
034Motorsport B9/B9.5 Audi S4/S5/SQ5 EA839 3.0T Dynamic+ Performance ECU & AL552 ZF8 Transmission Tuning Bundle
$850.00 – $2,100.00Select options034Motorsport Dynamic+ Performance Software for the Audi B9/B9.5 S4, S5, & SQ5 equipped with the EA839 3.0TFSI engine and Dynamic+ TCU Software Upgrade for AL552 ZF8 Transmission.
034Motorsport EA839 3.0T ECU and TCU tunes are flashed directly through the factory OBD-II port using the 034Motorsport Dynamic+ End User Flashing Kit, and offer dramatic increases in horsepower and torque throughout the powerband.
Included at no extra cost is the Stage 1 Dynamic+ Performance TCU Software for B9 Audi S4, S5, or SQ5 models equipped with the AL552 8-Speed ZF8 transmission. At an extra cost, upgrade to the Stage 2 TCU Tuning to further enhance the shifting and acceleration of your ZF8 Equipped 3.0T! Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the AL552 TCU safely and effectively raise the torque limits of the ZF8, allowing your car to make use of Stage 1 or Stage 2 Performance Software.
034Motorsport Dynamic+ Tuning for EA839 with Upgraded TTE710 Hybrid Turbocharger is available to dramatically improve the acceleration performance and power output of your B9 S4, S5, or SQ5. Dynamic+ Stage 3 Tuning will allow you to give those unsuspecting tuned Mustangs, Supras, or super cars a run for their money, ending a nice view of their headlights in your rearview mirror.
Stock: 350 HP / 391 TQ
Stage 1 91: 397 HP / 491 TQ
Stage 1 93: 431 HP / 567 TQ
Stage 1 E85: 486 HP / 601 TQ
Stage 2 91: 454 HP / 542 TQ
Stage 2 93: 476 HP / 576 TQ
Stage 2 E85: 510 HP / 616 TQ
Stage 3 91: 528 HP / 553 TQ
Stage 3 93: 604 HP / 620 TQ
Stage 3 MS109/260GT+: 693 HP / 685 TQ
Stage 3 E60 Mix: 720 HP / 720 TQ
Stage 3 E85 Pump: 643 HP / 650 TQ -
Quick View
Air to water high capacity heat exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5
$489.99Add to cartNew batch changes for Sept 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick View
(S4/B8, A6/C7) Audi heat exchanger convenience install pack
$72.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 4 Feet of 3/4″ High-quality hose (not cheap rubber hose/ will not collapse or kink easily) One 180 silicone hose 7 …
(S4/B8, A6/C7) Audi heat exchanger convenience install packRead More
-
Quick View
Audi RS5 B9 Cooling Power Pack
$2,495.00Add to cartMercRacing Heat Exchanger B9 RS5 At MercRacing, we are a team of passionate problem solvers. One of the challenges with forced induction is cooling. Superchargers and some turbocharged applications, like the Audi B9 RS5 require heat exchangers to keep your system cool. Unfortunately, the OEM heat exchanger is installed in a location that offers limited …
-
Quick ViewSale!
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
$195.00Add to cart- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95Read moreThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$29.25 – $34.95Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick ViewSale!
034Motorsport SüperDüper Charger 84mm Throttle Body System, B8/B8.5 Audi S4/S5 3.0TFSI
$629.00Read moreInstallation Effort: MILD
Supercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SüperDüper Charger 84mm Throttle Body System. The purpose of this kit is to improve power beyond the factory throttle body found on the supercharged 3.0 TFSI engine in the B8/8.5 S4/S5s, in a clean and cost-effective package.
-
Quick View
Audi Slim Heat Exchanger – Multiple Applications S4 S5 S6 A4 A6 SQ5 and many more
$299.95Add to cart7/6/2023 These are in stock and ready to ship. A budget-friendly unit for those looking to replace or upgrade the OEM HX and doing Stage 1 upgrades.
Compatible with most Audi cars, A6, A7 , S4, SQ5, etc. Good option for cars with front camera that cannot use our full size units.
-
Quick View
Audi heat exchanger convenience install pack
$38.95Add to cartIMPORTANT NOTES – PLEASE READ
- This kit is now included on the new heat exchangers starting DEC 2022.Â
- This product is not compatible with the old heat exchanger (original version)
- To be used on applications where the vehicle coolant lines of the heat exchanger are located on the driver side only.
-
Quick ViewSale!
Pierburg CWA150 Pump – with Audi harness
$425.00Add to cartNOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. -
Quick ViewSale!
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$345.00Add to cartBACKORDERED: Orders placed today will hold your spot in line for the next available units, Mid August 2022 ETA
One of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
-
Quick View
Audi RS5 B9 Heat Exchanger
$499.95Add to cartMercRacing Heat Exchanger B9 RS5 At MercRacing, we are a team of passionate problem solvers. One of the challenges with forced induction is cooling. Superchargers and some turbocharged applications, like the Audi B9 RS5 require heat exchangers to keep your system cool. Unfortunately, the OEM heat exchanger is installed in a location that offers limited …
-
Quick ViewSale!
Full Audi 3.0T Supercharged PCV Relocation Assistance Kit
$339.95Add to cart**CREC & C6 A6 ENGINE COMPATIBILITY UNKNOWN**
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
Audi divorce kit DIY components
$46.95Add to cartThese parts are specifically made for the MercRacing heat exchangers. Fitting for the heat exchanger bleed port 5 feet silicone hose for the heat exchanger to reservoir bleed port setup Flow control valve Billet T fitting for reservoir fill tank. Reinforced silicone cap for coolant system divorce operation. Click here for > INSTALLATION INFORMATION
Reviews
There are no reviews yet.