Category: S4 B8/B8.5 (2010-2016)
S4 B8/B8.5 (2010-2016)
Showing 1–15 of 19 results
- Quick ViewSale!
Air to water high capacity heat exchanger for Audi S4, S5, S6, A6, A7, SQ5
$449.99Add to cartThe Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help from Audi owners/friends, we now provide you a cooling solution that performs amazingly on your Stock, upgraded or higher boost tuned …
Air to water high capacity heat exchanger for Audi S4, S5, S6, A6, A7, SQ5Read More
- Quick View
Air to water high capacity heat exchanger – Aluminum Finish
$484.95Read moreThe Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help from Audi owners/friends, we now provide you a cooling solution that performs amazingly on your Stock, upgraded or higher boost tuned …
Air to water high capacity heat exchanger – Aluminum FinishRead More
- Quick ViewSale!
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$38.95Add to cartReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
- Quick ViewSale!
Pierburg CWA150 Pump – with Audi harness
$359.00Add to cartNOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. - Quick View
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95Add to cartThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
- Quick View
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$335.00Read moreOne of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
- Quick ViewSale!
034MOTORSPORT FRONT STRUT BRACE, B8 AUDI A4/S4, ALLROAD, BILLET ALUMINUM
$359.95Read more034Motorsport is proud to offer our Billet Aluminum Front Strut Brace for the B8 Audi A4/S4 & Allroad! These Audi models do not come with a strut brace from the factory, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. While the B8 chassis comes from the factory with a support bar located behind the fire wall, this component is not significantly structural to the chassis and allows strut tower deflection. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end due to undesired suspension geometry changes.
The 034Motorsport Strut Brace incorporates an extremely rigid billet aluminum center section that attaches to both strut towers and to the firewall in two locations, improving the vehicle’s steering feel and handling performance. This robust chassis reinforcement is machined from 6061-T6 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The end result is a significantly more rigid front end that provides precise, consistent feedback through the steering wheel and ensures that you enjoy a more connected driving experience.
This strut brace was thoroughly tested by 034Motorsport on in-house B8 and B8.5 Audi S4 Development Vehicles before release.
FEATURES:
- Truss Design is Lightweight and Extremely Rigid
- 6061-T6 Billet Aluminum Construction with Clear Anodized Finish
- Attaches to Both Strut Towers and the Firewall in Two Locations
- Engineered to Enhance Handling Dynamics and Performance
- Improves Steering Feel, Consistency, and Precision
WHAT’S INCLUDED:
- 034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement
- Strut Tower Brackets
- Strut Bar Brackets
- Transfer Punch
- Transfer Punch Guides (4)
- Mounting Hardware
- Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cart
