MercRacing Billet Shift Knob M10 x 1.5
$55.95
-
The MercRacing billet shift knob is an ergonomic and tactical feeling unit. Available in black anodized.
Each knob is precision cut with a pattern designed to improve the shifter grip and provide a commanding feel. Weight is 8oz.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
You must be logged in to post a review.
You may also like…
Related products
-
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5, A8-3.0T
$499.95Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
New for 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick View
Upgraded Heat Exchanger – Aluminum Finish
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design. -
Quick View
High Coolant Capacity heat exchanger for Audi S6, S7, A7, A6, Q5, SQ5, S4, S5, A8-3.0T
$599.95Add to cartIN STOCK READY TO SHIP
Newest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchangerÂ
The new version has the MercRacing logo embossed, an upgraded bleeder seal, lower header now has holes to allow rain/snow to drain out the lower row.
Our largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4.
-
Quick ViewSale!
Honda Billet Shift Knob Black Anodized
$55.95Add to cartThe MercRacing billet shift knob is an ergonomic and tactical feeling unit. Hard anodized black for a durable finish. Each knob is precision cut with a pattern designed to improve the shifter grip and provide a commanding feel. Weight is 8oz.
-
Quick ViewSale!
Stainless Steel Tensioner Pulley Upgrade Set
$199.95Add to cartThe pictured spacer is not included. The spacer is used on CT Engineering tensioners on the smooth idler pulley. If required, you can add the product by selecting “Add All” below in the “Frequently Bought Together” section.
-
Quick ViewSale!
Jackson Racing M62 Conversion Kit 8th 9th Gen Civic Si
$1,595.00Add to cartThis conversion kit allows for you to use the older Jackson Racing M62 supercharger. The approximate processing time for this product is 2-3 weeks.
Note:
This is verified compatible with 8th Gen Civic Si and 9th Gen Civic Si.
The pictured JRSC head unit is for display purposes and not included on the kit.
Cannot be used on RSX or EP3.
-
Quick View
MAP Sensor relocation for JRSC or custom applications
$79.95Add to cartThis unit allows you to cap your drive by cable throttle body and install the upgraded MAP or stock sensor for supercharged applications. Other vehicles that use this style MAP sensor can also benefit from this part if you do not have a mounting place for your MAP sensor. It secures it and avoids it …
MAP Sensor relocation for JRSC or custom applicationsRead More
-
Quick View
MR900 TVS Supercharger Kit – Comptech – CT Engineering Replacement
$4,195.00Select optionsSupercharger kit for Honda/Acura K20/24 Engines. Capable of 300+HP system. More power when on Ethanol fuels. The kit can be upgraded with a cooling package for power gains and improved performance. Compatible with many vehicles, such as: EP3, TSX, RSX Civic Si 8th/9thGen K swapped vehicles such as Lotus Elise/Exige EG hatch, etc. Boost the …
MR900 TVS Supercharger Kit – Comptech – CT Engineering ReplacementRead More
-
Quick View
High Coolant capacity heat exchanger for Audi S4 S6 S7 S8 A7 A6 A8 (Raw Aluminum)
$589.99Add to cartOur largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4 B8 and B8.5 and various other Audi vehicles.
This is for the Raw Natural aluminum finish (not polished)
Hoses for setup that have the connections on the driver side are included for free.Â
-
Quick View
Single Pulley Belt Tension Adjuster Bracket
$325.00Add to cartThis tensioner design comes from the engineers at CT Engineering/Comptech. It was one of the last tensioner designs on their 9th Gen Civic Si kits. This product has been requested a few times and MercRacing has decided to replicate its design and implemented some changes to increase its rigidity and simplified the number of parts …
Reviews
There are no reviews yet.