This pump upgrade is a favorite among performance shops and performance users worldwide. The pump offers a robust and innovative design. Driven by a brushless motor, integrated speed controller what can be controlled via remote module(PWM). The pump is extremely reliable while providing great flow and cooling performance.
The pump offers very quiet operation, even when operating at full speeds.
Specifications
- Plug and play harness included for Audi vehicles
- Installs as a replacement on the original OEM Audi location
- Can be used for other aftermarket air to water cooling systems
- Approximate Weight: 1.0 kg
- Amps usage: 8.5A max. / (approx. 0.2mA in standby mode)
- Flow: around 30-35 l/min @ 0.75bar / 40-45 l/min @ 0.50bar
- Speed: approximately 7000 rpm
| Weight | 6 lbs |
|---|---|
| Dimensions | 6 × 6 × 7 in |
You must be logged in to post a review.
You may also like…
- Quick View
Audi RS5 B9 Heat Exchanger
$479.95Add to cartMercRacing Heat Exchanger B9 RS5 At MercRacing, we are a team of passionate problem solvers. One of the challenges with forced induction is cooling. Superchargers and some turbocharged applications, like the Audi B9 RS5 require heat exchangers to keep your system cool. Unfortunately, the OEM heat exchanger is installed in a location that offers limited …
- Quick View
S4 B8.5 – A6 C7 – S6 Audi heat exchanger convenience install pack
$44.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 2 Feet of 3/4″ High-quality hose (not cheap rubber hose) 6 All stainless steel clamps (these will not rust) 2 straight …
S4 B8.5 – A6 C7 – S6 Audi heat exchanger convenience install packRead More
Related products
- Quick ViewSale!
034MOTORSPORT FRONT STRUT BRACE, B8 AUDI A4/S4, ALLROAD, BILLET ALUMINUM
$395.99Add to cart034Motorsport is proud to offer our Billet Aluminum Front Strut Brace for the B8 Audi A4/S4 & Allroad! These Audi models do not come with a strut brace from the factory, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. While the B8 chassis comes from the factory with a support bar located behind the fire wall, this component is not significantly structural to the chassis and allows strut tower deflection. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end due to undesired suspension geometry changes.
The 034Motorsport Strut Brace incorporates an extremely rigid billet aluminum center section that attaches to both strut towers and to the firewall in two locations, improving the vehicle’s steering feel and handling performance. This robust chassis reinforcement is machined from 6061-T6 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The end result is a significantly more rigid front end that provides precise, consistent feedback through the steering wheel and ensures that you enjoy a more connected driving experience.
This strut brace was thoroughly tested by 034Motorsport on in-house B8 and B8.5 Audi S4 Development Vehicles before release.
FEATURES:
- Truss Design is Lightweight and Extremely Rigid
- 6061-T6 Billet Aluminum Construction with Clear Anodized Finish
- Attaches to Both Strut Towers and the Firewall in Two Locations
- Engineered to Enhance Handling Dynamics and Performance
- Improves Steering Feel, Consistency, and Precision
WHAT’S INCLUDED:
- 034Motorsport Billet Aluminum Front Strut Brace Chassis Reinforcement
- Strut Tower Brackets
- Strut Bar Brackets
- Transfer Punch
- Transfer Punch Guides (4)
- Mounting Hardware
- Quick View
Aftercooler CNC Fill Tank
$189.00Read moreUniversal Fill tank for aftercoolers/intercoolers Beautiful Black Anodized CNC’d billet aluminum remote fill for excellent finish and enhanced durability. Provides an easy way to fill and inspect flow and fluid condition on your aftercooler system. Cap is Viton sealed for durable, leak and evaporation free system. 3/4″ tubes. Movable, slide and swivel installation arm …
Reviews
There are no reviews yet.