Audi S4 B8 B8.5 Divorce Reservoir
$239.99
This product is intended to be used with this install pack.Â
Check the instructions at the bottom of the description.
Product can be used on other Audi models with modification of the mounting bracket.
-
Stainless Steel reservoir/fill tank for setting up your air to water cooling system for best performance and eliminate air in the system automatically.
A beautifully polished unit that will outlast the life of your car. The use of this product allows you to run your personalized coolant mix for your setup.  You can run distilled water with some water wetter or a small amount of coolant for pump lubrication.  Water has better heat capacity and transfer than coolant. The unit allows for full-time air bleeding of the system as the air passes through the heat exchanger it is pushed out into the reservoir. this keeps your water in pristine air-free condition for the best cooling.  Air bubbles in the system will reduce performance dramatically.
The unit comes with a bracket that mounts to your car frame for ease of installation.
Click here for > INSTALLATION INFORMATION
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Quick View
Audi divorce kit DIY components
$46.95Add to cartThese parts are specifically made for the MercRacing heat exchangers. Fitting for the heat exchanger bleed port 5 feet silicone hose for the heat exchanger to reservoir bleed port setup Flow control valve Billet T fitting for reservoir fill tank. Reinforced silicone cap for coolant system divorce operation. Click here for > INSTALLATION INFORMATION
Related products
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER SINGLE BLEEDER SCREW REPLACEMENT B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$19.95Add to cartReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick View
Dynamic Steering Compact Fluid Cooler with 5/16″ or 8mm Connections
$75.00Add to cartSmall compact cooler for power steering, transmission, fuel, or oil use. Compact 9×3″ size fits anywhere and replaces OE unit or supplements cooling. Uses 5/16″ 8mm fittings, includes hose, clamps and mounting tie straps.
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$34.95Add to cartReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick View
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5
$40.00Add to cartThe 034Motorsport Street Density B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & B9 Audi A4/S4/Q5/SQ5 Transmission Mount Upgrade is designed to improve the performance of the factory transmission mount assembly with a high durometer rubber mount replacement. This part is a direct, drop-in upgrade for the factory rubber damping medium used at the rear of the transmission …
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5Read More
-
Quick ViewSale!
Pierburg CWA150 Pump – with Audi harness
Original price was: $397.95.$379.95Current price is: $379.95.Add to cartIMPORTANT NOTES: Please update your pump fuse to 20-25 amps IF USING THE OEM HARNESS.  The best USE OF THIS PUMP IS WITH A SEPARATE ELECTRICAL CIRCUIT AND RELAY.  I do not have information on how to do this or a pre-made harness.  This would be a DIY application that you will have to research or have a trained mechanic perform for you.  Â
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. -
Quick View
Audi 4.0T V2 Intercooler/Charge Cooler Core
$795.95Add to cartAs of June 24, 2025, a new batch is being manufactured. Due to factory changes and a move of fabrication from Germany to USA, there will be a delay on this batch as the process in completed. Thanks so much for the support and patience while we go through this transition. Â
A durable, high-performance replacement core for the Audi 4.0T that increases reliability over the OEM core. With this upgrade, the days of blown cores that could leave you stranded are a thing of the past.
-
Quick View
Audi 3.0T Gen 2 (CREC) Thermostat Housing
$299.99Replaces 06E121111AT – OEM Audi 3.0T Gen 2 Thermostat
Introducing the aluminum Audi 3.0T Gen 2 Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC machined, aluminum anodized thermostat.
Supplier: German Performance Solutions
Add to cart -
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5 – Polished
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design.
-
Quick ViewSale!
Pierburg CWA100 Pump – with Audi harness
Original price was: $389.95.$379.95Current price is: $379.95.Add to cartThis pump upgrade is a favorite among performance shops and performance users worldwide. The pump offers a robust and innovative design. Driven by a brushless motor, integrated speed controller what can be controlled via remote module(PWM). The pump is extremely reliable while providing great flow and cooling performance. The pump offers very quiet operation, even …
-
Quick View
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$1,098.00Add to cartOne of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
-
Quick View
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
$665.99Add to cartLooking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Hardware Kit! Included is all the hardware needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! NOTE: Tuning software not included.
-
Quick View
Audi Divorce Reservoir Black DLC Coated – Black Chrome
$292.95Add to cartThis product is intended to be used with this install pack.Â
Check the instructions at the bottom of the description.The product can be used on various Audi models with modifications to the mounting bracket where needed.
-
Quick View
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
$148.95Add to cart- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
B8/B8.5 S4/S5 3.0TFSI Tune
$500.00Unleash the full potential of your S4 or S5!
Discover the Power of Jackal Motorsports Tunes! We have you covered with our cutting-edge tuning solutions! We offer Stage 1, Stage 2, and Stage 2+ tunes to boost your vehicle’s performance. Along with full custom tuning support.
Supplier: Jackal Motorsports
Select options -
Quick View
034Motorsport SüperDüper Charger 84mm Throttle Body System, B8/B8.5 Audi S4/S5 3.0TFSI
$649.00Add to cartInstallation Effort: MILD
034Motorsport SüperDüper Charger 84mm Throttle Body System – Süpercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SüperDüper Charger 84mm Throttle Body System. The purpose of this kit is to improve power beyond the factory throttle body found on the supercharged 3.0 TFSI engine in the B8/8.5 S4/S5s, in a clean and cost-effective package. Purchase this kit if you already have the S34 Intake System and would like to upgrade your throttle body.
-
Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cart -
Quick View
B8 A4/A5/S4/S5/RS5 With 0B5/0B6/0BK DSG/Auto Driveshaft Center Support Bearing Carrier Upgrade
Price range: $299.99 through $329.99Holds the driveshaft where it should be. Isolation dampers minimize vibrations.
Supplier: JXB Performance
Select options This product has multiple variants. The options may be chosen on the product page -
Quick View
B8 A4/A5/S4/S5/RS5 With 6MT Driveshaft Center Support Bearing Carrier Upgrade
Price range: $299.99 through $329.99Holds the driveshaft where it should be. Isolation dampers minimize vibrations.
Supplier: JXB Performance
Select options This product has multiple variants. The options may be chosen on the product page -
Quick View
GPS Audi 3.0T Thermostat full Assembly
$299.99VERSION 2 IS HERE: We made two significant changes to improve the CNC Machined Housing further. The first big change was to correct the overcooling issue that some customers (particularly in colder climates) were experiencing. If you purchase one of the original version 1 thermostat housings, please GPS, and they will ship you a retrofit kit free of charge. The second big change was moving the assembly screws to the outside of the oring grove. That thoroughly ensures the screw cannot drop into the engine block if it were ever to come loose.
Replaces 06E121111AL – OEM Audi 3.0T Thermostat
Supplier: German Performance Solutions
Add to cart -
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5
$549.95Add to cartThe Audi air to water-cooled applications required an advanced configuration that further expands on their cooling system and addressed higher cooling capacity and water volume. We took this challenge seriously and with our help from Audi owners/friends, we now provide you a cooling solution that performs amazingly on your Stock, upgraded or higher boost tuned …
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5Read More
-
Quick View
Full Audi 3.0T Supercharged PCV Relocation Assistance Kit
$274.95Read more**CREC & C6 A6 ENGINE COMPATIBILITY UNKNOWN**
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
RedStar Audi B8/B8.5 3.0T Supercharged Headers
Price range: $3,395.00 through $3,440.00Select options This product has multiple variants. The options may be chosen on the product pageRedStar Exhaust long tube headers is the ultimate mod for your Audi 3.0 TFSI supercharged engine. Dyno tested and proved design to gain 30HP easily with no other modifications. You can get even more, 500+hp with the proper tune and other mods! Replaces the Stock manifold and Catted/Test pipe section.
-
Quick ViewSale!
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
Original price was: $370.99.$368.95Current price is: $368.95.Add to cartThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
-
Quick View
High Coolant Capacity heat exchanger for Audi S6, S7, A7, A6, Q5, SQ5, S4, S5 Polished
$639.95Add to cartOur largest, high-volume capacity and extended cooling heat exchanger. Compatible with S4 B8 and B8.5 and various other Audi vehicles.
This is for the raw, natural aluminum finish with polished end tanks and a top cover.
Reviews
There are no reviews yet.