Shop
Showing 1–24 of 132 results
-
Quick View
Air to water high capacity heat exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5
$489.99Add to cartNew batch changes for Sept 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick View
Audi heat exchanger convenience install pack
$38.95Add to cartIMPORTANT NOTES – PLEASE READ
- This kit is now included on the new heat exchangers starting DEC 2022.Â
- This product is not compatible with the old heat exchanger (original version)
- To be used on applications where the vehicle coolant lines of the heat exchanger are located on the driver side only.
-
Quick View
K-Series adjustable belt auto tensioner
$459.97Add to cartOur Latest design! Gen4 as of June 2021 – All hardware is now full stainless steel. No more rusting, CNC logo, additional hole added for custom setups that require the middle pulley to be located at a lower position. THIS IS NOT COMPATIBLE WITH EP3 JACKSON RACING KITS. Here is a strong, solid, and serviceable …
-
Quick View
(S4/B8, A6/C7) Audi heat exchanger convenience install pack
$72.95Add to cartSave time running to the stores and use these higher quality components not found easily on local stores. This kit is to facilitate the installation when upgrading from the Audi OEM heat exchanger system. 4 Feet of 3/4″ High-quality hose (not cheap rubber hose/ will not collapse or kink easily) One 180 silicone hose 7 …
(S4/B8, A6/C7) Audi heat exchanger convenience install packRead More
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$29.25 – $34.95Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick ViewSale!
Audi 4.0T V2 Intercooler/Charge Cooler Core
$869.99Read moreUNFORTUNATELY THE WAGNER TUNING shipment of these cores is now scheduled to arrive the first week of Nov.
Previous ESTIMATED time of arrival around SEPTEMBER 22nd is no longer valid.
NEW!: For 2023 the core has been revamped to add additional density, additional channels, and improved performance. We have also added a bleed port to aid in purging the air out of the system during the initial fill-up.
A true high-performance replacement core for 4.0T Audi Vehicles. Increases reliability over the OEM core.
-
Quick View
Smooth Idler pulley
$110.00 – $130.00Select optionsSmall idler pulley with low friction high rpm sealed replaceable bearing. Excellent long-life replacement upgrade for CT Engineering smooth idler pulley. Aluminum 6061 Anodized black Stainless steel spacer included for retrofitting the CT Engineering/Comptech old tensioners. Do not buy this part for these tensioners:
-
Quick View
CT Engineering High Flow Modular Inlet
$364.99Select optionsThis unit is properly sized to standard OEM, larger OEM and aftermarket throttle bodies. Increase power as much as 40hp on drive by wire when paired with a J37 throttle body. Â Click here for Dyno video Adapter plate is included. Select the needed plate. The designed profile enhances air flow distribution to the supercharger intake. …
-
Quick View
Modular highflow inlet – JRSC M62
$369.99Select optionsThis unit is ported to 74mm allow the use of OEM or larger aftermarket throttle bodies with included adapter plate of your choice. Benefits: Ability to upgrade throttle body without having to use spacers. Increased and smoother air flow due to its larger and direct path from throttle body to supercharger Hidden vacuum lines at …
-
Quick ViewSale!
CT-Engineering Aftercooler Kit
$1,395.99Select optionsUniversal Aftercooler kit for your CT-Engineering supercharger. Make more power consistently and reliably. Reduces heat soak problems from stop and go traffic Increase horsepower and torque Kit includes: High performance Bosch brushless water pump with mounting insulated brace. Aftercooler core Two pass heat exchanger 12 feet of hose CNC fill tank Mounting brackets for heat …
-
Quick ViewSale!
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
$195.00Add to cart- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick ViewSale!
Pierburg CWA150 Pump – with Audi harness
$425.00Add to cartNOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used. -
Quick View
MAP Sensor relocation for JRSC or custom applications
$79.95Add to cartThis unit allows you to cap your drive by cable throttle body and install the upgraded MAP or stock sensor for supercharged applications. Other vehicles that use this style MAP sensor can also benefit from this part if you do not have a mounting place for your MAP sensor. It secures it and avoids it …
MAP Sensor relocation for JRSC or custom applicationsRead More
