Category
- – CLEARANCE
- A8 4.0T 2009-2018
- Accessories
- Aftercooler Parts and Accessories
- Aftercoolers
- Apparel and Merch
- Audi
- 3.0T – Supercharger Upgrade
- 3.0T Cooling Upgrades
- 4.0T Cooling Upgrades
- A4 -2009-2016 B8.5 2.0 TFSI
- A6
- A7 (2010-2017)
- A7 2012-2018 C7 3.0 TFSI
- A8 – 3.0T
- ALL ROAD 2010-2016 B8 3.0 TFSI
- Audi Coolant Divorce Parts
- JXB Performance
- PCV Relocation
- Pumps and Parts
- Q5
- RS3 2011-2013 8P
- RS5/RS7 B9 (2017+)
- RS7
- S4 B8/B8.5 (2010-2016)
- S4 B9
- S5 B9
- S6 C7 4.0 TFSI
- S7 (2012-2017)
- S8
- SQ5
- SQ5 B9
- TTRS 2012-2013 8J 2.5 TFSI
- Belt Tensioner System
- Blower Pulleys
- Drivetrain
- Engine Cooling
- Fuel System
- Heat Exchangers
- Manifolds and Parts
- Supercharger Inlets
- Supercharger Kits
- TVS Supercharger Head Units
- Water Pumps
C7 Driveshaft Center Support Bearing Carrier Upgrade
$299.99 – $329.00
Holds the driveshaft where it should be. Isolation dampers minimize vibrations.
Supplier: JXB Performance
-
Share this:
The Problem
The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its travel. While that’s great for making sure no NVH makes it to the cabin, the stock bushing is extremely prone to failure, especially in harsher climates and on higher-powered cars. When the bushing lets go, it leads to excessive vibrations and clunking which can damage the transmission and rear diff. To make matters worse, the stock carrier is molded onto the non-serviceable center support bearing, leading to costly driveshaft replacement.
Videos:
The Solution
This upgraded unit keeps the driveshaft firmly in place at all times, and its polyurethane construction ensures it will never wear out. The thick bushings ensure the driveshaft cannot move from center, maintaining driveshaft alignment at all times.
The Bushings
Two options are available for the bushings, both of which are many times over better than the stock bushings. We’ve paid close attention to the NVH levels associated with this upgrade. From experience on the B8 platform, we’ve engineered a custom isolator bushing that separates the carrier from the body of the vehicle and mounting bolt to substantially reduce NVH levels.
The street bushings absorb most of the NVH from the drivetrain. Expect some light NVH at some speeds in the form of a soft hum. With a modified exhaust or windows down you’ll probably never hear it. Most NVH is heard between 20-40 mph. At highway speeds it fades away.
The track bushings are for those who want no-compromise drivetrain performance. These will create a substantial amount of cabin noise throughout the low range, again fading at higher speeds, but not entirely. Not sure which is for you? Try them both, they’re interchangeable!
Installation
Installation doesn’t require the removal of the driveshaft. The 2-part design clamps around the unserviceable OEM bearing. The old carrier must be removed, so a cutting tool is required. We’ve designed this carrier to avoid interference with the factory heat shields, so it has no effect on exhaust clearance.
Fitment
-
C7, A6, S6 & RS6, A7, S7 & RS7
Video
Weight | 3 lbs |
---|---|
Dimensions | 12 × 9 × 2 in |
Bushing Stiffness | Street (Soft, Quieter), Track (Hard, Louder), Give me Both! |
You must be logged in to post a review.
You may also like…
-
Quick View
High Coolant Capacity heat exchanger for Audi S6, S7, A7, A6, Q5, SQ5, S4, S5, A8-3.0T
$599.95Add to cartNewest version as of March 2024 – Lower coolant pipe movable to left or right side of the heat exchangerÂ
The new version has the MercRacing logo embossed, an upgraded bleeder seal, lower header now has holes to allow rain/snow to drain out the lower row.
Our largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4.
Add to WishlistAdd to Wishlist
Related products
-
Quick View
Upgraded Heat Exchanger – Aluminum Finish
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design.Add to WishlistAdd to Wishlist -
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5, A8-3.0T
$499.95Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
New for 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
Add to WishlistAdd to Wishlist -
Quick View
TGK Motorsport Audi C7/7.5 Front & Rear Sway Bar Kit
$599.99If you’re looking to improve the handling of your Audi C7 A6/S6/RS6/A7/S7/RS7, this is the best place to start! These cars have a lot more body roll than what’s to be desired factory, and the stock sway bars don’t quite do enough to keep the body from understeering. TGK Motorsport Sway bars are made from …
TGK Motorsport Audi C7/7.5 Front & Rear Sway Bar KitRead More
Supplier: TGK Motorsport
Add to cartAdd to WishlistAdd to Wishlist
Reviews
There are no reviews yet.