Category
- – CLEARANCE
- A8 4.0T 2009-2018
- Accessories
- Aftercooler Parts and Accessories
- Aftercoolers
- Apparel and Merch
- Audi
- 3.0T – Supercharger Upgrade
- 3.0T Cooling Upgrades
- 4.0T Cooling Upgrades
- A4 -2009-2016 B8.5 2.0 TFSI
- A6
- A7 (2010-2017)
- A7 2012-2018 C7 3.0 TFSI
- A8 – 3.0T
- ALL ROAD 2010-2016 B8 3.0 TFSI
- Audi Coolant Divorce Parts
- JXB Performance
- PCV Relocation
- Pumps and Parts
- Q5
- RS3 2011-2013 8P
- RS5/RS7 B9 (2017+)
- RS7
- S4 B8/B8.5 (2010-2016)
- S4 B9
- S5 B9
- S6 C7 4.0 TFSI
- S7 (2012-2017)
- S8
- SQ5
- SQ5 B9
- TTRS 2012-2013 8J 2.5 TFSI
- Belt Tensioner System
- Blower Pulleys
- Drivetrain
- Engine Cooling
- Fuel System
- Heat Exchangers
- Manifolds and Parts
- Supercharger Inlets
- Supercharger Kits
- TVS Supercharger Head Units
- Water Pumps
034Motorsport SüperDüper Charger 84mm Throttle Body System, B8/B8.5 Audi S4/S5 3.0TFSI
$649.00 Original price was: $649.00.$629.00Current price is: $629.00.
Installation Effort: MILD
034Motorsport SüperDüper Charger 84mm Throttle Body System – Süpercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SüperDüper Charger 84mm Throttle Body System. The purpose of this kit is to improve power beyond the factory throttle body found on the supercharged 3.0 TFSI engine in the B8/8.5 S4/S5s, in a clean and cost-effective package. Purchase this kit if you already have the S34 Intake System and would like to upgrade your throttle body.
-
Share this:
Product Description:
Significant effort went into developing this comprehensive performance-improving throttle body upgrade solution for the supercharged 3.0 TFSI engine found in the B8 and B8.5 generation of S4 and S5. The 034Motorsport SüperDüper Charger 84mm Throttle Body System offers an easy bolt-on solution to those looking to maximize performance and flow!.
The 034Motorsport SüperDüper Charger utilizes a VDO 84mm throttle body mated to a cast and machined aluminum throttle body adapter, offering a smooth transition between the larger throttle body to the supercharger inlet. This results in a 20% increase in flow over the OE throttle body right out of the box. Additionally, the throttle body adapter and gasket can be port matched to the supercharger during supercharger porting, allowing for increased airflow.
034Motorsport Dynamic+ Tuning is required to safely run this SüperDüper Charger 84mm Throttle Body System. Files to support this upgraded hardware are included with our Stage 2+ 91, 93, 100, 104, & E40 octane options free of charge. Simply select the file designated with SüperDüper and you’re good to go! NOTE: This is only for Stage 2+ files. We do not have Stage 1 or Stage 2 files for the SüperDüper Charger.
Features:
- Cast and Machined A356 Aluminum Throttle Body Adapter
- Upgrades to a VDO 84mm Throttle Body
- Improved Flow Where the Stock Throttle Body Becomes Restrictive
- 20% Increase in Flow Over the OE Throttle Body
-
- Stock 70mm : 380 CFM
- 034Motorsport 84mm with Adapter: 457 CFM
- OEM BMW V8 Throttle Body for Reliability and Long Lasting Performance
- Smooth Transition from the Large Throttle Body to the Supercharger Inlet
- Throttle Body Adapter and Gasket Can be Port Matched to the Supercharger During Supercharger Porting, Allowing Even More Flow
- Wire-Reinforced Multi-Ply Silicone Hose
-
- Maintains Smooth Inside Surface for Optimum Flow
- Nylon Breather Tube Connection Nipple
What’s Included:
- 84mm VDO Throttle Body
- Throttle Body Adapter
- Silicone Hose
- Wiring Harness Adapter
- Adapter to Supercharger Gasket
- All Necessary Hardware
Replaces OE Part Numbers:
- 06E 133 062 H
- 06E 133 062 G
- 06E 133 062 C
Notes:
- Included with the SüperDüper Charger 84mm Throttle Body System is our wire-reinforced multi-ply silicone hose. This hose is designed to be mated with X34 Carbon Fiber Intake if you already have our intake system. If you do not have our X34 Carbon Fiber Intake, you can purchase the full SüperDüper Instruction Bundle (COMING SOON).
- This kit will not work with stock intake
- Modifications may be necessary to make the system work with other aftermarket intakes, or stock intake.
EMISSIONS DISCLAIMER:
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on-highway use, and that it is not legal for use on highway or street vehicles.
Weight | 8 lbs |
---|---|
Dimensions | 12 × 12 × 8 in |
You must be logged in to post a review.
Related products
-
Quick View
Audi 3.0T Thermostat Housing
$234.99Introducing the Audi 3.0T Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC-machined, aluminum anodized thermostat.
Inspired by shopdap.com’s list of Common Issues with 3.0T (Supercharged) TFSI Audi Engines.Supplier: German Performance Solutions
Read moreAdd to WishlistAdd to Wishlist -
Quick View
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
Available on: May 31, 2024 at 8:40 pm$148.95Pre-order now- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
Add to WishlistAdd to Wishlist -
Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cartAdd to WishlistAdd to Wishlist -
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5, A8-3.0T
$499.95Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
New for 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
Add to WishlistAdd to Wishlist -
Quick View
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
$665.99Add to cartLooking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Hardware Kit! Included is all the hardware needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! NOTE: Tuning software not included.
Add to WishlistAdd to Wishlist -
Quick View
Audi heat exchanger convenience install pack
$38.95Add to cartIMPORTANT NOTES – PLEASE READ
- This kit is now included on the new heat exchangers starting DEC 2022.
- This product is not compatible with the old heat exchanger (original version)
- To be used on applications where the vehicle coolant lines of the heat exchanger are located on the driver side only.
Add to WishlistAdd to Wishlist -
Quick View
Audi divorce kit DIY components
$46.95Add to cartThese parts are specifically made for the MercRacing heat exchangers. Fitting for the heat exchanger bleed port 5 feet silicone hose for the heat exchanger to reservoir bleed port setup Flow control valve Billet T fitting for reservoir fill tank. Reinforced silicone cap for coolant system divorce operation. Click here for > INSTALLATION INFORMATION
Add to WishlistAdd to Wishlist -
Quick View
034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95Read moreThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
Add to WishlistAdd to Wishlist -
Quick View
MercRacing 3.0TFSI SUPERCHARGER SINGLE BLEEDER SCREW REPLACEMENT B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$14.99 – $18.00Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
Add to WishlistAdd to Wishlist -
Quick View
Audi B8/B8.5 3.0T Supercharged Headers
$3,395.00 – $3,440.00Select optionsRedStar Exhaust long tube headers is the ultimate mod for your Audi 3.0 TFSI supercharged engine. Dyno tested and proved design to gain 30HP easily with no other modifications. You can get even more, 500+hp with the proper tune and other mods! Replaces the Stock manifold and Catted/Test pipe section.
Add to WishlistAdd to Wishlist -
Quick View
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5
$40.00Add to cartThe 034Motorsport Street Density B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & B9 Audi A4/S4/Q5/SQ5 Transmission Mount Upgrade is designed to improve the performance of the factory transmission mount assembly with a high durometer rubber mount replacement. This part is a direct, drop-in upgrade for the factory rubber damping medium used at the rear of the transmission …
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5Read More
Add to WishlistAdd to Wishlist -
Quick View
Full Audi 3.0T Supercharged PCV Relocation Assistance Kit
Available on: May 31, 2024 at 8:41 pm$262.95Pre-order now**CREC & C6 A6 ENGINE COMPATIBILITY UNKNOWN**
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
Add to WishlistAdd to Wishlist -
Quick ViewSale!
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$360.00Original price was: $360.00.$345.00Current price is: $345.00.Add to cartBACKORDERED: Orders placed today will hold your spot in line for the next available units, Mid August 2022 ETA
One of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
Add to WishlistAdd to Wishlist -
Quick ViewRated 5.00 out of 5
Upgraded Heat Exchanger – Aluminum Finish
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design.Add to WishlistAdd to Wishlist
Reviews
There are no reviews yet.