034MOTORSPORT HIGH PRESSURE FUEL PUMP PISTON UPGRADE KIT, 2.0TSI, 2.5TFSI, 3.0TFSI SUPERCHARGED
$328.95
The 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI Inline 5 found in the 8J Audi TTRS, and the 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
Unlock up to 50% more flow over the factory high-pressure fuel pump, allowing the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High-Pressure Fuel Pump!
Installation Effort: MEDIUM
INSTALL GUIDE : https://store.034motorsport.com/docs/034-106-6052_Install_Instructions.pdf
Out of stock
Receive in-stock notifications for this.
PRODUCT DESCRIPTION:
The 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, 2.0TSI, 2.5TFSI, 3.0TFSI Supercharged is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the Gen 2 EA888 2.0 TSI engines in the B8/B8.5 Audi A4/Allroad & A5, the 2.5 TFSI in the 8J Audi TTRS, and the EA837 3.0T TFSI Supercharged equipped B8/B8.5 Audi S4/ S5/Q5/SQ5 and C7 Audi A6/A7.
By upgrading the factory high pressure fuel pump with the 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, 2.0TSI, 2.5TFSI, 3.0TFSI Supercharged,the factory fueling limits are raised by up to 50% in 2.0T, 2.5T, or 3.0T engines. This increased flow allows the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High Pressure Fuel Pump!
FEATURES:
- Yields up to 50% Flow Increase Over the Factory High Pressure Fuel Pump
- Raises the Factory Fueling Limits Present in 2.0T, 2.5T, and 3.0T Engines
- Increased Flow to Meet the Demands of E85 Optimized Tunes
- Required for Most Stage 2+ Performance Software
- Fuel Pump Internals Precision-Machined to Aerospace Tolerances
- DLC Coated Piston and Cylinder for Reduced Friction and Increased Performance
- Matched Piston and Cylinder for Absolute Precision
WHAT’S INCLUDED:
- 1x Pump Piston & Cylinder Set
FITMENT GUIDE
Make / Model / Years / Chassis / Engine
AudiA4 2009-2016B8/B8.5 2.0 TFSI
AudiA5 2008-2017B8/B8.5 2.0 TFSI
AudiA6 2005-2011C6 3.0 TFSI
AudiA6 2012-2018C7/C7.5 2.0 TFSI
AudiA6 2012-2018C7/C7.5 3.0 TFSI
AudiA7 2012-2018C7/C7.5 3.0 TFSI
AudiA8 2011-2018D4 3.0 TFSI
AudiAllroad 2010-2016B8/B8.5 3.0 TFSI
AudiRS3 2011-20138P 2.5 TFSI
AudiS4 2010-2017B8/B8.5 3.0 TFSI
AudiS5 2008-2017B8/B8.5 3.0 TFSI
AudiSQ5 2012-2017B8/B8.5 3.0 TFSI
AudiTTRS 2012-2013 8J 2.5 TFSI
| Weight | 3 lbs |
|---|
You must be logged in to post a review.
You may also like…
-
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5, A8-3.0T
$499.95Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
New for 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick View
Pierburg CWA100 Pump – with Audi harness
$435.00Add to cartThis pump upgrade is a favorite among performance shops and performance users worldwide. The pump offers a robust and innovative design. Driven by a brushless motor, integrated speed controller what can be controlled via remote module(PWM). The pump is extremely reliable while providing great flow and cooling performance. The pump offers very quiet operation, even …
Related products
-
Quick View
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5
$40.00Add to cartThe 034Motorsport Street Density B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & B9 Audi A4/S4/Q5/SQ5 Transmission Mount Upgrade is designed to improve the performance of the factory transmission mount assembly with a high durometer rubber mount replacement. This part is a direct, drop-in upgrade for the factory rubber damping medium used at the rear of the transmission …
STREET DENSITY TRANSMISSION MOUNT UPGRADE, B8/B8.5/B9 AUDI A4/S4/RS4, A5/S5/RS5, Q5/SQ5Read More
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER SINGLE BLEEDER SCREW REPLACEMENT B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$14.99 – $18.00Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick View
TGK Motorsport Audi C7/7.5 Front & Rear Sway Bar Kit
$599.99If you’re looking to improve the handling of your Audi C7 A6/S6/RS6/A7/S7/RS7, this is the best place to start! These cars have a lot more body roll than what’s to be desired factory, and the stock sway bars don’t quite do enough to keep the body from understeering. TGK Motorsport Sway bars are made from …
TGK Motorsport Audi C7/7.5 Front & Rear Sway Bar KitRead More
Supplier: TGK Motorsport
Add to cart -
Quick ViewSale!
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
Original price was: $360.00.$345.00Current price is: $345.00.Add to cartBACKORDERED: Orders placed today will hold your spot in line for the next available units, Mid August 2022 ETA
One of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
-
Quick View
Dual Pulley Hardware Kit, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI
$665.99Add to cartLooking to maximize the performance of the Supercharged 3.0T Audi S4/S5/SQ5? Look no further. Get up to 540HP and 491FT-LBS of torque with the 034Motorsport Dual Pulley Hardware Kit! Included is all the hardware needed to go from stock, to a Stage 2+ tuned, dual pulley upgraded beast! NOTE: Tuning software not included.
-
Quick ViewSale!
034Motorsport SüperDüper Charger 84mm Throttle Body System, B8/B8.5 Audi S4/S5 3.0TFSI
Original price was: $649.00.$629.00Current price is: $629.00.Add to cartInstallation Effort: MILD
Supercharge the performance of your B8/8.5 Audi S4/S5 with the 034Motorsport SüperDüper Charger 84mm Throttle Body System. The purpose of this kit is to improve power beyond the factory throttle body found on the supercharged 3.0 TFSI engine in the B8/8.5 S4/S5s, in a clean and cost-effective package.
-
Quick View
Audi B8/B8.5 3.0T Supercharged Headers
$3,395.00 – $3,440.00Select optionsRedStar Exhaust long tube headers is the ultimate mod for your Audi 3.0 TFSI supercharged engine. Dyno tested and proved design to gain 30HP easily with no other modifications. You can get even more, 500+hp with the proper tune and other mods! Replaces the Stock manifold and Catted/Test pipe section.
-
Quick View
Full Audi 3.0T Supercharged PCV Relocation Assistance Kit
Available on: May 31, 2024 at 8:41 pm$262.95Pre-order now**CREC & C6 A6 ENGINE COMPATIBILITY UNKNOWN**
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
Audi 3.0T Thermostat Housing
$234.99Introducing the Audi 3.0T Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC-machined, aluminum anodized thermostat.
Inspired by shopdap.com’s list of Common Issues with 3.0T (Supercharged) TFSI Audi Engines.Supplier: German Performance Solutions
Read more -
Quick View
B8/8.5 Ultimate Short Throw Shifter Kit
$269.99The ONLY short throw that drastically reduces throw length, slop and flex under load, and eliminates missed 1-2 shifts.
Includes:
Billet B8/8.5 Shifter Mounting Plate (drastically reduces slop, prevents 1-2 shift lockout)
Billet B8/8.5 Short Shift Clamp (shortens throw 27%)
Supplier: JXB Performance
Add to cart -
Quick View
Audi heat exchanger convenience install pack
$38.95Add to cartIMPORTANT NOTES – PLEASE READ
- This kit is now included on the new heat exchangers starting DEC 2022.Â
- This product is not compatible with the old heat exchanger (original version)
- To be used on applications where the vehicle coolant lines of the heat exchanger are located on the driver side only.
-
Quick View
Audi 3.0T PCV Relocation Parts Kit (No Billet PCV)
Available on: May 31, 2024 at 8:40 pm$148.95Pre-order now- DOES NOT INCLUDE THE Billet PCV housing Adapter
Supercharged Audi 3.0T PCV Relocation Assistance Kit. Additional parts are required along with this kit. Please watch the video from Audi C7 Owners (& read the video description) via the link below to fully understand everything needed to complete this project before purchasing.
PCV Relocation DIY Link: https://tinyurl.com/ye22kt6e
***DISCLAIMER: ONCE AGAIN, THIS IS NOT EVERYTHING NEEDED TO COMPLETE THE RELOCATION. PLEASE READ ALL OF THE INFORMATION LISTED IN THE PRODUCT DESCRIPTION BELOW***
-
Quick View
Upgraded Heat Exchanger – Aluminum Finish
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design. -
Quick View
Audi divorce kit DIY components
$46.95Add to cartThese parts are specifically made for the MercRacing heat exchangers. Fitting for the heat exchanger bleed port 5 feet silicone hose for the heat exchanger to reservoir bleed port setup Flow control valve Billet T fitting for reservoir fill tank. Reinforced silicone cap for coolant system divorce operation. Click here for > INSTALLATION INFORMATION
Reviews
There are no reviews yet.