Audi Slim Heat Exchanger – Multiple Applications S4 S5 S6 A4 A6 SQ5 and many more
$299.95
7/6/2023 These are in stock and ready to ship. A budget-friendly unit for those looking to replace or upgrade the OEM HX and doing Stage 1 upgrades.
Compatible with most Audi cars, A6, A7 , S4, SQ5, etc. Good option for cars with front camera that cannot use our full size units.
-
Frequently Bought Together
This is a thinner and lower-budget version of our heat exchanger and is for those who want something better than the OEM HX but not quite ready or need the larger capacity/higher-performance units.
Description:
- 4-pass design
- Increased cooling and recovery capacity over OEM
- High density core
- 1.8″ deep (thickness) perfect for cars with limited space.
- Unit dimensions: 25″ wide by 15″ tall by 1.8″ thickness
The unit will include a 90-degree silicone hose, two clamps, and one coupler to assist with installation. You may need to order our Audi convenience install pack for vehicles that have the OEM heat exchanger hoses split Passenger and Driver side.
| Weight | 15 lbs |
|---|---|
| Dimensions | 27 × 17 × 4 in |
1 review for Audi Slim Heat Exchanger – Multiple Applications S4 S5 S6 A4 A6 SQ5 and many more
You must be logged in to post a review.
You may also like…
-
Quick View
Audi heat exchanger convenience install pack
$38.95Add to cartIMPORTANT NOTES – PLEASE READ
- This kit is now included on the new heat exchangers starting DEC 2022.Â
- This product is not compatible with the old heat exchanger (original version)
- To be used on applications where the vehicle coolant lines of the heat exchanger are located on the driver side only.
-
Quick View
Pierburg CWA100 Pump – with Audi harness
Available on: May 4, 2024 at 9:43 pm$435.00Pre-order nowThis pump upgrade is a favorite among performance shops and performance users worldwide. The pump offers a robust and innovative design. Driven by a brushless motor, integrated speed controller what can be controlled via remote module(PWM). The pump is extremely reliable while providing great flow and cooling performance. The pump offers very quiet operation, even …
-
Quick View
Pierburg CWA150 Pump – with Audi harness
$445.95Add to cartNOTE: Please update your pump fuse to 25 amps
The CWA150 is basically the high-pressure variant of the CWA100-3 we are also offering.
The dimensions and the weight are nearly the same.
The new pumps have a new designed impeller and impeller housing to accommodate for the higher differential pressures.
It is suitable on anything that profits from that higher pressure capability to maintain consistent flow when added volume and larger heat exchangers are used.
Related products
-
Quick View
Audi 3.0T Thermostat Housing
$234.99Introducing the Audi 3.0T Thermostat – a game-changer in engine performance and reliability. Say goodbye to the dreaded plastic thermostat and hello to a more dependable ride with our CNC-machined, aluminum anodized thermostat.
Inspired by shopdap.com’s list of Common Issues with 3.0T (Supercharged) TFSI Audi Engines.Supplier: German Performance Solutions
Read more -
Quick ViewSale!
Jackson Racing M62 Conversion Kit 8th 9th Gen Civic Si
$995.99Add to cartThis conversion kit allows for you to use the older Jackson Racing M62 supercharger. The approximate processing time for this product is 2-3 weeks.
Note:
This is verified compatible with 8th Gen Civic Si and 9th Gen Civic Si.
The pictured JRSC head unit is for display purposes and not included on the kit.
Cannot be used on RSX or EP3.
-
Quick View
Upgraded Heat Exchanger – Aluminum Finish
$499.99Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
Semi-polished finish – Raw Aluminum, Embossed MercRacing Logo on the top header, drain holes on the bottom header to avoid collecting water, improved bleeder seal design. -
Quick View
High Coolant capacity heat exchanger for Audi S4 S6 S7 S8 A7 A6 A8 (Raw Aluminum)
$589.99Add to cartOur largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4 B8 and B8.5 and various other Audi vehicles.
This is for the Raw Natural aluminum finish (not polished)
Hoses for setup that have the connections on the driver side are included for free.Â
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER BLEEDER SCREW KIT FOR AUDI B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$29.25 – $34.95Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick View
034Motorsport B9/B9.5 Audi S4/S5/SQ5 EA839 3.0T Dynamic+ Performance ECU & AL552 ZF8 Transmission Tuning Bundle
$850.00 – $2,100.00Select options034Motorsport Dynamic+ Performance Software for the Audi B9/B9.5 S4, S5, & SQ5 equipped with the EA839 3.0TFSI engine and Dynamic+ TCU Software Upgrade for AL552 ZF8 Transmission.
034Motorsport EA839 3.0T ECU and TCU tunes are flashed directly through the factory OBD-II port using the 034Motorsport Dynamic+ End User Flashing Kit, and offer dramatic increases in horsepower and torque throughout the powerband.
Included at no extra cost is the Stage 1 Dynamic+ Performance TCU Software for B9 Audi S4, S5, or SQ5 models equipped with the AL552 8-Speed ZF8 transmission. At an extra cost, upgrade to the Stage 2 TCU Tuning to further enhance the shifting and acceleration of your ZF8 Equipped 3.0T! Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the AL552 TCU safely and effectively raise the torque limits of the ZF8, allowing your car to make use of Stage 1 or Stage 2 Performance Software.
034Motorsport Dynamic+ Tuning for EA839 with Upgraded TTE710 Hybrid Turbocharger is available to dramatically improve the acceleration performance and power output of your B9 S4, S5, or SQ5. Dynamic+ Stage 3 Tuning will allow you to give those unsuspecting tuned Mustangs, Supras, or super cars a run for their money, ending a nice view of their headlights in your rearview mirror.
Stock: 350 HP / 391 TQ
Stage 1 91: 397 HP / 491 TQ
Stage 1 93: 431 HP / 567 TQ
Stage 1 E85: 486 HP / 601 TQ
Stage 2 91: 454 HP / 542 TQ
Stage 2 93: 476 HP / 576 TQ
Stage 2 E85: 510 HP / 616 TQ
Stage 3 91: 528 HP / 553 TQ
Stage 3 93: 604 HP / 620 TQ
Stage 3 MS109/260GT+: 693 HP / 685 TQ
Stage 3 E60 Mix: 720 HP / 720 TQ
Stage 3 E85 Pump: 643 HP / 650 TQ -
Quick View
Upgrade Heat Exchanger for Audi S4, S5, S6, S7, A6, A7, Q5, SQ5, A8-3.0T
$499.95Add to cartNewest version March 2024 – Lower coolant pipe movable to left or right side of the heat exchanger
New for 2023: Improved bleeder seal, MercRacing logo embossed on the header, the lower section now has evacuation holes for allowing drainage, further improvement of packaging, and various product cosmetic improvements to set our product further apart while still maintaining a great value. See the photos for a preview of these changes.
-
Quick ViewSale!
X34 CARBON FIBER INTAKE, AUDI B8/8.5 S4/S5 3.0 TFSI
$345.00Add to cartBACKORDERED: Orders placed today will hold your spot in line for the next available units, Mid August 2022 ETA
One of the best performing B8/B8.5 air intake kits on the market? The X34 Carbon Fiber Intake, Audi B8/8.5 S4/S5 3.0 TFSI delivers improved power, supercharger sound, and overall performance to the 3.0T found in B8/8.5 S4/S5s, in a clean, cost-effective package.
-
Quick View
MercRacing 3.0TFSI SUPERCHARGER SINGLE BLEEDER SCREW REPLACEMENT B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8
$14.99 – $18.00Select optionsReplace those failure-prone, plastic 3.0 TFSI supercharger bleeder screws with the MercRacing 3.0 TFSI Supercharger Bleeder Screw Kit for Aud B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8 vehicles. The OEM bleeder screws are not designed for multiple uses and the soft plastic can easily be damaged to the point where they no longer can be loosened or tightened. These CNC …
-
Quick View
High Coolant Capacity heat exchanger for Audi S6, S7, A7, A6, Q5, SQ5, S4, S5, A8-3.0T
$599.95Add to cartNewest version as of March 2024 – Lower coolant pipe movable to left or right side of the heat exchangerÂ
The new version has the MercRacing logo embossed, an upgraded bleeder seal, lower header now has holes to allow rain/snow to drain out the lower row.
Our largest, high volume capacity and extended cooling heat exchanger. Also compatible with S4.
gioa6ftw (verified owner) –
This Heat exchanger has to be the most underrated one by far you can really pack a punch this sucker and make it perform amazingly with a good optimized coolant loop I’m currently running it on my a6 3.0T with s4 b8.5 style supply and return supercharger coolant pipes
(both pipe ends go to the right where the AUX coolant pump is)
and a unpinned CWA-50 (stock pump)
And I’m seeing some very consistent coolant temps at idle with some good revs no higher than
198F°
Mods include stage 1+ unitronic ecu software on e20 catless with MERC HX and CTS INTAKE (at the time of dataloging I have no switched back to stock intake for sleeper look ;))